Error 80020321 When Lauching an PSP ISO Game

Karol Krizka @ August 27, 2007

PSP

Many PSP users that have a homebrew enabled firmware, like the M33 edition, like to dump the contents of their games from the UMD to the memory card. This will save the file as an ISO, allowing them to backup the games or play them without having to carry any UMD disks around. I do the same thing, but suddenly it stopped working today. I tried to launch “Mind Quiz” to take daily test, but I was greeted with the following error: “The game could not be started. (80020321)”.

After a lot of tinkering, I found my problem. To play any ISO games, you need to have an UMD game disk in your PSP. It does not matter what game it is of. In my case, I was running a little experiment with a UMD video disk that came in my PSP starter pack. After I finished, I forgot to take it out of the PSP. Well, at least I learned that it has to be an UMD game disk, and not a UMD video disk.

If the above solution does not work for you, you might also try to upgrading to the latest M33 firmware. I found that with Dungeon Maker: Hunting Grounds, I had to have version firmware version 3.40 or greater. If this is the case, you might want to check out my M33 upgrading tutorial.

Another way is to use the No-UMD mode that is configurable in the recovery menu, but it is not compatible with all games. To get into this menu, you have to fully shut off your PSP, and turn it on again while holding the R button. When you load the recovery menu, navigate into the Configuration section and select the “UMD Mode” option. Press the X button until you see “currently: M33 driver -NO UMD-”. Navigate back into the opening menu, and exit. This will restart your PSP, and you are ready to roll.

Did you enjoy this post? Then why not subscribe to my RSS feed or subscribe by e-mail? Also check out the many other FREE ways to appreciate a blogger.


Related Posts

RSS feed | Trackback URI

38 Comments »

2007-08-31 09:41:18

[...] the processing speed of your PSP. I have already briefly mentioned how to access this menu in an earlier post, but it was not very clear and detailed. So I’ve decided to dedicate an entire post to it. In [...]

Comment by Zero Hawk
2008-07-24 03:17:31

Hi your idea is also working because the same thing happened to me. I thought a lot about this and then i pressed the select button and then changed the UMD ISO MODE INTO M33 DRIVER by pressing the left or right button and now once again i can play the ISO/CSO games without a UMD. Try it, it works.
Thanks!

 
 
2007-08-31 17:39:11

[...] wrote a shot blog post on this issue a while ago. You might want to check it out here: Error 80020321 When Lauching an PSP ISO Game | Karol Krizka __________________ My Blog Free Programming [...]

 
Comment by XpanD
2007-10-02 02:20:21

Works perfectly :)

Thanks :)

Comment by Mario
2008-08-13 00:17:34

Many thanls, it worked…!!!
I spent hours trying to set it up, and many more hours to download the game!!! (by the way, is it always soooo slowww to download a psp torrent game??).

Well, thx again man! and happy gaming.

mp.
PS: How do i do when I wnat to play a game from the umd, do i have to change it again, or is it automatically??

 
 
Comment by mozo
2007-10-06 19:51:30

i tried your suggestions on the 8002..error msg…and its work…thank bro…cheers

 
Comment by CY
2007-10-31 21:32:23

thanks alot it really works for the 80020321 error in my psp. But would this setting affect the normal psp configuration?

 
Comment by wais Subscribed to comments via email
2007-11-05 22:50:15

hi man thanks it works now but i did’t want to put a umd in my psp every time i wanted to play a iso game so i took the recovery menu thing u said now i’am evey happy play iso games with no-umd thanks

Comment by tk
2007-12-03 05:17:31

thank you very much.

 
 
Comment by Tyler
2007-12-07 19:17:09

SWAT TL won’t load causes error. The game could not be started (80020148).

 
Comment by donald
2008-01-25 18:56:29

man your so good at this!!!everytime i encounter a problem from my psp..all your solutions help!!thank god for giving us karol krizka..good work bro

 
Comment by Michele Subscribed to comments via email
2008-01-27 09:21:03

hey guys
i have a problem with my psp while running games which are formattted in iso format in memory stick duo but when i try to play my game NBA 08 it says the game cannot be started 80020148

I am just dieingggggggggggggggg
pls helllllllpppppppppppppp

 
Comment by Julio T
2008-02-03 00:19:34

THANK YOU!
YOUR POST SAVE MY LIFE!

 
Comment by a1989inc Subscribed to comments via email
2008-02-11 07:41:31

Dude u rock.. thanks a lot for the post..

 
Comment by Deathrow
2008-04-14 21:39:13

I tried to update and it says this!? Do you know why?

Comment by Karol Krizka
2008-04-17 11:05:59

Make sure the GAME folder is in 3.xx kernel mode.

 
 
Comment by AsaAdetimirin
2008-05-03 17:39:35

thxs..this helped so much
=]

 
Comment by snaprell Subscribed to comments via email
2008-07-09 05:24:26

tnx bro…. it works smoothly

 
Comment by CODEBLUE Subscribed to comments via email
2008-07-11 10:59:15

I cant figure it out i know i might sound dumb but the damn message appeared just this morning and ive got no umd option when i do the start up thing with the r button can you help please anyone roadhog34340@hotmail.com

 
Comment by CODEBLUE Subscribed to comments via email
2008-07-11 11:02:59

this man is a genius let me expand on this procedure tho go to configuration settings change the kernal setting to 3.5xx or 4 xx depending on your make and model and umd mode is right below it thanks man you saved my life

 
Comment by shanil
2008-07-13 09:48:45

thanks it did work for error 8008
i appreciate it

 
Comment by ali
2008-08-04 12:02:13

thank you it works for me too it help me a lot

 
Comment by keyblademumu
2008-08-07 18:07:03

u rock!!! it workd!!!

 
Comment by Sheela
2008-08-09 21:53:06

Thank you so much!

 
Comment by mid Subscribed to comments via email
2008-08-23 06:08:33

3.71M here.No this way doesnt work for me:( Also in m33 mode i keep getting the 80020148 error.I tried everything i saw in net but no luck.I have 5 iso games and only one works.I dont know what else to do.Anyone have an idea?

 
Comment by Abhinav
2008-08-23 08:33:53

Yes changing to no-umd mode from the recovery mode really did the trick.
Thanks a lot.

 
Comment by harby
2008-08-31 10:45:26

Hi, I’ve tried your method of turning into no umd mode but then my psp just stayed in the black screen after i open the iso game. do you know what the problem might be?

 
Comment by Alex
2008-10-01 05:43:36

Great! :)it works Thanks and i wish you the best!

 
Comment by jerny
2008-10-14 05:07:01

it did work using the M33 recovery Menu, but when im playing the games they all in slow motion, what should i do?

Comment by Mac-J Subscribed to comments via email
2008-11-03 09:52:20

Speed up the CPU.

 
 
Comment by mac
2008-10-18 12:04:22

hey…buddy this trick really work thats the wonderful…. thanks to post this things online……thanks lot…

 
Comment by marcus
2008-10-21 05:55:04

Hi Karol,

I want to extend my gratitude for saving me! I semi-bricked my PSP and used Hellcat’s Recovery Flasher to install 4.01 m33 firmware. It worked but I can’t play any of my games!! Until I found out your post. :)

Really great work. :)

Many Thanks!!!

 
Comment by karliboe
2008-10-21 07:44:53

Thanks alot! i was searching for 3 hours on my psp, finaly found it :)

 
Comment by Anghell
2008-10-22 20:15:13

Thanks very match,you help me.now I am playing again)))!

 
Comment by GensanBoy
2008-10-24 17:46:48

Thanks very much for this tip, I would have brought my sons psp to the store to have it fixed but with your tip, it saved me money. It took me only a few minutes to fix it. My son is very happy now. Mabuhay!

 
Comment by Kael
2008-11-09 06:31:15

It worked for me! Thanks so much, your tip was a saviour. :D

 
Comment by Alex HK
2008-11-12 06:07:00

thx very much, you save my life

 
Comment by WaT3ver3t3rnitY Subscribed to comments via email
2008-11-15 10:07:20

Thanks dude you saved my ass back there =D
keep it up !

 
Name (required)
E-mail (required - never shown publicly)
URI
Subscribe to comments via email
Your Comment (smaller size | larger size)
You may use <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> <pre lang="" line=""> in your comment.

Feed